FLASH TRIGGER GUIDE – TTL & REMOTE MANUAL RADIO TRIGGERS

TTL & REMOTE MANUAL RADIO TRIGGERS

 

TTL and Remote Manual radio triggers have come a long way in the last few years, with reliable options now available in every price range. They can offer a lot of convenience and features over basic manual triggers. Compatibility is the key word here though, as camera brands, models, and lights used, will often effect the options and functions available.

See also – MANUAL RADIO TRIGGER GUIDE HERE

RECOMMENDATIONS - Click to Expand

Phottix ODIN – Phottix again have an ideal mid priced option for Canon, Nikon, & Sony, with the fully featured, though super simple and reliable ODIN. Mix TTL and manual in any of 3 groups through the fast simple interface, which works the same way on any compatible camera and flash.

Canon 600EX-RT / ST-E3-RT – Canon have really delivered with the new wireless radio system built into the 600EX-RT speedlites and optional compact ST-E3_RT master unit. For wedding and event photographers you can’t get a more solid option for flash on camera use than mounting the speedlight directly on the hotshoe, and no extra receivers, cords, and batteries required just to fire the slaves. Nikon users will have to wait for now, or head straight to the Quantum Trio.

Pixel King PRO – Pixel’s third generation TTL Trigger, now with fast built in interface, and pass through hotshoe allowing a full TTL flash on camera. Mix ETTL and Remote Manual in any group like the Odin and Canon above, but in the inexpensive price range.

YongNuo YN-622C – YongNuo have really raised the bar at the very inexpensive end with the new YN-622C for Canon, and YN-622N for Nikon, bringing smoother function and all the refinements earlier Pixel King owners had really been hoping for, and all at a considerably lower price.

Aokatec AK-TTL – PENTAX and OLYMPUS (as well as Canon, Nikon & Sony)  also have an option now with another new inexpensive option in the AK-TTL. The AK likely have some refinement yet to come, but users have been reporting quite good results the units currently available.

PocketWizard ControlTL – With Canon claiming back many wedding and event photographers with the 600EX-RT built in radio system, PocketWizard have raised the bar again ensuring their position as industry leaders in the commercial photography sector, with control of both Canon and Nikon  speedlights, as well as Elinchrom RX, PCB Einstein, AlienBees, and White Lightning monolights. As well as the Sekonic L-478DR touchscreen light meter, allowing manual power levels to be adjusted directly on the meter while taking readings.

Radiopopper PX – For wedding /event photographers requiring flash on Camera use, the small and light PX transmitter (which sits on top of a flash head) has the advantage of solid direct flash on camera mounting, rather than using flimsy pass through hotshoes. Mainly an advantage for Nikon users as Nikon does not have their own radio based flash system yet (like the Canon 600EX-RT). Nikon also allows mixed TTL and Remote Manual in separate groups.

Red Line

PERMALINK

REMOTE MANUAL ONLY – NO TTL

Remote Manual Power Control Only, NO TTL  (TTL flash on camera may be supported)

 Radiopopper JRX PERMALINK

Radiopopper JrX Studio

Around – $170 a set – Tx & Rx  + $20 – $30 for speedlight hotshoe / cord.

Universal – Single Firing Pin

Radiopopper JrX are great system for Remote Manual Power Control if you have access to inexpensive older Nikon TTL speedlights like the SB-24, 25, 26 28, 80dx etc or SB-600 & SB-800, any of the Canon EX speedlites, and Paul C Buff Alien Bees monolights. The JrX have fast simple dials on the transmitter to change power levels for 3 groups of flashes. The main limitation is Nikon Flashes from the SB-900 onwards are no longer compatible with the JrX remote manual power control, and HSS is not supported with any speedlights.

Compatible with Radiopopper PX TTL triggers

Allow Flash on Camera – YES, if Tx is connected via PC sync cord to camera

AmazonUKEbayB&H PhotoAdoramaRadiopopper

MORE DETAIL - Click to Expand

Radiopopper JrX are the only Manual triggers offering Remote Manual Power Control via the simple quench pin system. This is a brilliant system if you have access to inexpensive older Nikon film camera TTL flashes like the SB-24, SB-26, SB-28 SB-80dx, etc at reasonable prices. They will also work with the SB-600 & SB-800, any of the Canon EX ETTL flashes, and Paul C Buff Alien Bees monolights as well. (They will still fire SB-900 etc and most other lights, just not control their power level remotely).

Positives

  • Remote manual power control with many TTL capable speedlights & Alienbees monolights
  • Universaly compatible with most cameras
  • 3 groups with simple control dial on the Tx
  • Great range and reliability – 100 – 500m
  • Fast sync speed – full x-sync (1/250th etc).  Electronic shutters aprox 1/1200th +
  • 200V trigger voltage
  • Compatible with Radiopopper PX transmitter
  • Standard 3.5mm headphone sync sockets
  • Light Meter use possible
  • Great service from Radiopopper

Negatives

  • No HSS available with speedlights
  • No locking ring on the transmitter
  • No hotshoe on receivers
  • Non standard CR123A batteries
  • No lanyard strap or hole for a strap to hang or mount the receiver
  • Shutter release is not a standard feature (works but requires a cord)
  • No flash wake up feature
  • Separate USA and European versions

 

The JrX are also good solid manual triggers with fast sync speeds and high safe trigger voltage. Unlike some of the TTL triggers available, the power changes are separate to the flash fire signal, so fast sync speeds are possible and there are no pre-flashes at all, which means no issues using light meters either.

The JrX transmitter also use a simple single firing pin on the foot which means they can be used on any camera, or even held off camera to change power levels and take a meter reading with the test fire button.

Older Nikon flashes are becoming in limited supply though and the SB-900 are no longer compatible (SB-800 and SB-600 are compatible). Current Canon EX flashes are compatible as well, it’s just that you’re paying for the extra ETTL and High Speed Sync (HSS) features with those, which may be better exploited with the many inexpensive TTL triggers now becoming available.

The JrX studio receivers also require an extra cord or hotshoe to connect to your flash unit, which is at least $20 from flashzebra.com, and $30 for the Radioppoper “cube” hotshoe.

Backward / Forward Compatibility – The JrX are also compatible with the Radiopopper PX TTL system and can be used with the JrX or PX transmitter to control Alien Bees monolights (but not the later Einstein).

The Radiopopper JrX and Px also have separate USA (FCC) and European (CE) aproved versions so you will need the correct version for your location.

 

AmazonUKEbayB&H PhotoAdoramaRadiopopper 

 Hahnel Viper PERMALINK

Hahnel Viper

Around – $220 a set – Tx & Rx

Canon – version only currently available

Hahnel Viper are Remote Manual Triggers with an ETTL Pass Through Hotshoe on the transmitter. They provide Remote Manual Power Level Control of 3 groups of speedlights, adjusted directly through the fast change interface on the transmitter unit. The Viper require Canon MK II style compatible ETTL flashes, but do not support any ETTL off-camera. They do allow a flash on-camera to operate in full ETTL via the Pass Through Hotshoe on the transmitter unit. USB sockets allow for firmware updates and connecting manual flashes or studio lights. No HSS is available with the off-camera flashes.

Not compatible with any other Hahnel triggers.

Allow Flash on Camera – YES

Amazon UK, Ebay UK

MORE DETAIL - Click to Expand

Features

  • For Canon cameras / flash guns & compatible models
  • ISM 2.4GHz digital transmission (more than 100M)
  • Digital Channel Matching provides reliable connections, eliminating the risk of interference from other wireless products within range
  • LCD Display, back-lit, indicating groups A, B & C on/off and flash power output settings
  • Each group can be turned on/off or flash power output adjusted with individual control button on the Viper transmitter
  • Viper Receiver has a 2.5mm socket and a Mini USB socket to connect to studio lights
  • Mini USB socket – For software upgrade or external 5V power supply
  • Powered by the most convenient power source – 2 x AA batteries (each on transmitter and receiver) for
  • approx 120Hr

 

Website – Hahnel

Amazon UKEbay UK 

Red Line

PERMALINK

BASIC TTL ONLY

No TTL ratios, Remote Manual Power Control, or Groups

Hahnel Tuff PERMALINK

Hahnel Tuff TTL

Around – $150 a set – Tx & Rx

Canon – version only available (Nikon to come)

Hahnel Tuff TTL are a simple, single group TTL trigger, currently only available for Canon, but Nikon version to come. They allow FEC from the camera, HSS to 1/8000th, and Second Curtain Sync. The Tuff feature a great removable silicon rubber case to protect against wear and tear. USB socket for firmware updates, and connecting manual flashes or studio lights. NO TTL groups, ratios, or manual power setting.

Not compatible with any other Hahnel triggers.

Allow Flash on Camera – NO

Amazon, UK, Ebay, UKAdorama  

MORE DETAIL - Click to Expand

Website – Hahnel

AmazonUKEbayUKAdorama 

Phottix Strato TTL PERMALINK

Phottix Strato TTL

Around – $120 – Tx & Rx

CanonNikon – (Sony to come)

Phottix Strato TTL are a simple, single group, TTL trigger. They allow FEC from the camera, HSS to 1/8000th and Second Curtain Sync. The Strato TTL feature high build quality, low profile on the camera, LCD display and quick-change buttons for fast FEC adjustments directly on the transmitter. USB socket for firmware updates, 3.5mm Rx sync port for manual flash or studio lights, and a camera shutter release function. NO TTL groups, ratios, or manual power setting.

Compatible with Phottix Strato II, Strato, and Atlas II manual triggers

Allow Flash on Camera – NO

Amazon UK, Ebay, B&H Photo, AdoramaPhottix

MORE DETAIL - Click to Expand

Website – Phottix

Amazon UKEbay, B&H PhotoAdoramaPhottix 

Red Line

PERMALINK

INEXPENSIVE TTL & REMOTE MANUAL

 Aokatec AK-TTL PERMALINK

Aokatec AK-TTL

Around – $110 a set – Tx & Rx

Canon – Nikon – Sony – Pentax – Olympus – via the same units

AK-TTL are a relatively new simple optic to radio converter, working on a similar principle to the well established Radiopopper PX. They convert the optic based wireless flash system already in many cameras to a much less limited and more reliable radio communication. The Major advantage here is the AK-TTL offer a solution for Pentax and Olympus users who currently have no other radio based alternatives available. The same units can also be used across a number of Camera brands, as long as they have an existing optic wirelss flash control system available. The other advantage is for solid flash on camera mounting avoiding possible weak Pass Through Hotshoes.

Allow Flash on Camera – YES

Amazon, Ebay

MORE DETAIL - Click to Expand

Website – Aokatec

AmazonEbay 

 YN-622C YN-622C-TX PERMALINK

YongNuo YN-622C & YN-622N

Around – $80 a set – 2 Transceivers – FULL REVIEW Canon

Canon – Nikon versions available

YN-622 are really a turning point with inexpensive TTL triggers. They follow the similar Pixel Kings (shown bellow) but offer significant refinements in general function and features. Most notably adding TTL ratios and a Pass Through Hotshoe for TTL flash on camera use. And all at a significantly lower price. The Canon version YN-622C now offer the full functions available through the Canon Flash Control Menu, ETTL ratios, Remote Manual Power Setting in 3 groups, HSS to 1/8000th, and Second Curtain Sync. The one step backward though is a lack of USB port for firmware updates for future camera models. Also as good as the 622C are they are still limited by the Canon Flash Control menu, where higher priced options offer more control and convenience with their own interface directly on the transmitter units. Functionality can depend on camera and flashes used. The Nikon version does not have control through the camera menu, but it does allow a master flash or SU-800 controller to be mounted on top of the transmitter and used as the interface for adjustments.

Not currently compatible with any other YongNuo Triggers.

Allow Flash on Camera – YES

YN-622C – Amazon, UK, Ebay, YongNuo Ebay
YN-622N – Amazon, UK, Ebay, YongNuo Ebay

YN-622N-TX – Amazon, UK, Ebay, YongNuo Ebay

MORE DETAIL - Click to Expand

Canon YN-622C full review HERE

Nikon YN-622N 0verview HERE

CAMERA COMPATIBILITY – CANON

The functions available with the 662C do depend on camera and flash models used, and they are basically split into Type A & B Cameras (and Mark I & II style flashes).

TYPE A CAMERAS – with Camera Flash Control Menu
Manual – Full Remote Manual Power Control in 3 groups from the camera menu
ETTL – Full ETT Ratio Control and FEC in 3 groups from the camera menu

1Ds III,  1D IV,  1D III,
5D III,  5D II,
7D,  60D,  50D,  40D,
650D T4i,  600D T3i,  550D T2i,  500D T1i,  450D XSi,
1100D T3,  1000D XS.

Powershot G12 – So far we have user confirmation the G12 will work in both ETTL (with FEC from the camera) and Manual Power Level controlled via the camera Flash Control Menu. (ETTL ratios or multiple Manual groups are yet to be confirmed).

TYPE B CAMERAS – without external flash control menu
Manual – You must set the manual power level directly on the flash
ETTL – Global FEC control is available from the camera, but not ratios. Individual FEC can be set directly on each flash to achieve a ratio though.

1D II,  1D
5D Original,
30D,  20D,  10D,
350D XT,  400D XTi,  300D D-Rebel,

 

FLASH COMPATIBILITY – CANON

FULL REMOTE CONTROL
Flashes that will support remote flash control through the camera menu.
Manual – Full Remote Manual Power Control in 3 groups from the camera menu.
ETTL – Full ETT Ratio Control and FEC in 3 groups from the camera menu.

Canon - 600EX(RT), 580EX II, 430EX II, 320EX, 270EX II
YongNuo (with HSS) – YN568EX
YongNuo (without HSS) – YN565EX C, YN565 II C, YN468 II C, YN467 II C, YN465 C
Nissin (with HSS) – Di866 II – may require a factory settings reset to function correctly (and in manual etc) with the 622c.
Nissin (without HSS) – Di622 II
Metz – 58 AF-2, 48 AF-1 (possibly AF-56 and AF-50 yet to be confirmed)

PARTIAL CONTROL
Flashes that do not support remote flash control through the camera menu.
Manual – You must set the manual power level directly on the flash.
ETTL – Global FEC control is available from the camera. Ratios may be available, though individual FEC can also be set directly on each flash to achieve a ratio if needed.

Canon – 580EX, 550EX, 430EX
Metz – 54mz4
Nissin (with HSS) – Di866
Sigma – 500 DG Super, 530 DG Super
Sunpak – PZ42X – Confirmed ETTL and FEC from the camera – No HSS

 

Website – Canon, Nikon

Amazon 

Pixel Knight PERMALINK

Pixel Knight

Around – $140 a set – Tx & Rx

Canon – Nikon – versions available

Pixel Knights were the first TTL radio triggers available from China. Still available, but superseded by the King, and King Pro, shown below.

MORE DETAIL - Click to Expand

Pixel Knights were the first TTL radio triggers available from China. Providing off-camera ETTL, HSS, and Remote Manual Power Control with the Canon version. The Knights are still widely available but the later “King” version shown below offer a lot more refinements (more so in the Canon version) and often sell at lower prices now. Most significantly the Knights lack a USB port for firmware updates which the Kings also have, so its likely any current or future cameras with compatibility issues will not be supported.

Not compatible with any other Pixel Triggers.

Allow Flash on Camera – NO

Amazon

Website – Canon – Nikon 

 Pixel King PERMALINK

Pixel King

Around – $120 a set – Tx & Rx – FULL REVIEW Canon

CanonNikonSony – versions available

Pixel King are the second generation TTL radio triggers from Pixel. Still available, but superseded by the King Pro shown below.

The Canon version have the most function operating through Canon’s built in Flash Control Menu. This allows Remote Manual Power Control for 3 groups of speedlights, HSS to 1/8000th, and Second Curtain Sync. The Canon version now have ETTL ratios, though there is no flash on camera supported, while the Nikon version do have a TTL Pass Through Hotshoe on the Tx. Nikon and Sony version Kings are limited to basically one combined TTL flash group, with no ratios and no remote manual power settings.

Compatible with the Pixel Opas manual triggers.

Allow Flash on Camera – Canon NO, Nikon Yes

Amazon, UK, Ebay

MORE DETAIL - Click to Expand

Full Canon Review – HERE

 

CAMERA COMPATIBILITY – CANON

The functions available with the Kings depend on camera and flash models used, and they are basically split into Type A & B Cameras (and Mark I & II style flashes).

TYPE A CAMERAS – with Camera Flash Control Menu
Manual – Full Remote Manual Power Control in 3 groups from the camera menu
ETTL – FEC in 3 groups from the camera menu. ETTL Ratios A:B, A:B C.

1Ds III,  1D IV,  1D III,
6D, 5D III,  5D II,
7D,  60D,  50D,  40D,
600D T3i,  550D T2i,  500D T1i,  450D XSi,
1000D XS.

TYPE B CAMERAS – without external flash control menu
Manual – You must set the manual power level directly on the flash
ETTL – Global FEC control is available from the camera, No Ratio control.

1D II,  1D
5D Original
30D,  20D,  10D
350D XT,  400D XTi,  300D D-Rebel,

 

FLASH COMPATIBILITY – CANON

FULL REMOTE CONTROL
Flashes that will support remote flash control through the camera menu.
Manual – Full Remote Manual Power Control in 3 groups from the camera menu.
ETTL – Full ETTL Ratios and FEC in 3 groups from the camera menu, FEC can not be set directly on the flash.

Canon - 600EX(RT), 580EX II, 430EX II, 320EX, 270EX II
YongNuo  YN565EX C (no HSS)
Nissin – Di866 II
Metz – 56 AF,  50AF, 48 AF

PARTIAL CONTROL
Flashes that do not support remote flash control through the camera menu.
Manual – You must set the manual power level directly on the flash.
ETTL – Global FEC control is available from the camera. No ratio control, FEC can not be set directly on the flash.

Canon – 580EX, 430EX
Note – 550ex is no longer compatible with any remote ability, basic flash fire only (HSS still works)

BASIC TRIGGER ONLY
Studio lights or manual speedlights with a trigger voltage less than 60 volts – Hotshoe flash trigger voltage check list here

 

COMPATIBILITY – NIKON

Flashes
Nikon – SB-900,SB-910,SB-800,SB-700,SB-600,SB-400
& Metz flashes.

 

COMPATIBILITY – SONY

Cameras – Updates in progress, please check the Pixel website for current updates

 

Website – Canon – Nikon – Sony

AmazonUKEbayEachShot 

 Pixel King Pro PERMALINK

Pixel King Pro & King X

Around – $140 a set – Tx & Rx

Canon – Nikon  Canon – FULL REVIEW

Pixel King Pro Transceiver, and King X receiver are Pixel’s third generation TTL triggers. No longer relying on the limited Canon Flash Control Menu, the new built in interface provides significant improvements with mixed TTL or Remote Manual Power selectable in any of 3 groups, Auto or Manual flash Zoom, and fast direct access to adjustments. HSS to 1/8000th and Second Curtain Sync as before. Now combined with a TTL Pass Through Hotshoe for flash on camera use. The King Pro case is also now reinforced with a steel frame inside for added strength. But most significantly the King Pro now have double the range of most other hotshoe TTL triggers. See More Detail below.

Compatible with Pixel King MK I receivers in ETTL only.

Allow Flash on Camera – YES

Canon – Amazon, UK, Ebay
Nikon – Amazon, UK, Ebay

MORE DETAIL - Click to Expand

Pixel King Pro & King X for Canon Full Review HERE

Model King Pro – King X
Wireless System Digital FSK 2.4GHz
Range Up to 300m
Channels 15 fixed channels and 1 auto channel
Receiver Output TTL hot shoe, cable sync port
Power Transmitter: 2 AA batteries (100 hrs) (continuous work)
Receiver: 2 AA batteries (120 hrs) (continuous work)
Flash Mode E-TTL, TTL, M (for Canon)
Mixed Mode Support Mixed Mode (Such as, TTL in Group A, Manual in Group B)
EV Support different EV addition/subtraction of each TTL group setting
Ratios Supports output light ratios
Sync Mode 1st curtain, 2nd curtain, High Speed Sync, Red-eye reduction
Group Control 3 groups (7 different combinations)
Function Supports flash zooming, focal length, Iso, shutter speed, FV lock and FP
Sync Speed 1/8000 second
Compatible Flash Flashgun, Studio light and outdoor light
Firmware Support Upgrade the device by downloading new firmware online

 

Pixel Website

Canon – AmazonUKEbayEachShot
Nikon – AmazonUKEbayEachShot 

 Dazzne KODY TTL PERMALINK

Rikon Dazzne Kody TTL

Around – $250 a set – Tx & Rx

Canon – version available

Kody TTL have a large easy to read built in interface supporting mixed TTL or Remote Manual Power Levels in any of 3 groups, Auto or Manual flash Zoom, and fast direct access to adjustments. HSS to 1/8000th and Second Curtain Sync. A TTL Pass Through Hotshoe on the TX allows for flash on camera use, though with the added height that is more suitable to a small flash for fill light or connecting an ETTL cord to a flash mounted more securely on a bracket. Function is almost identical to the Pixel King Pro above, except that Manual Power Adjustments are in full stops only on the Kody. See More Detail below.

Compatible with – TBA

Allow Flash on Camera – YES (best for small speedlites)

Rikon Website

MORE DETAIL - Click to Expand

Model Rikon Dazzne Kody TTL
Wireless System Digital FSK 2.4GHz
Range Up to 100m
Channels 15 fixed channels and 1 auto channel
Receiver Output TTL hot shoe, cable sync port
Power Transmitter: 2 AA batteries (300 hrs)
Receiver: 2 AA batteries (200 hrs)
Flash Mode E-TTL, TTL, M (for Canon)
Other camera models TBA
Mixed Mode Support Mixed Mode (Such as, TTL in Group A, Manual in Group B)
EV Support different EV addition/subtraction of each TTL group setting
Ratios Supports output light ratios
Sync Mode 1st curtain, 2nd curtain, High Speed Sync, Red-eye reduction
Group Control 3 groups (7 different combinations)
Function Supports flash zooming, focal length, Iso, shutter speed, FV lock and FP
Sync Speed 1/8000 second
Compatible Flash Flashgun, Studio light and outdoor light
Firmware Support Upgrade the device by downloading new firmware online

Red Line

PERMALINK

MID PRICED – TTL & REMOTE MANUAL

 Phottix Odin PERMALINK

Phottix Odin

Around – $330 a set – Tx & Rx – FULL REVIEW

CanonNikonSony – versions available

Phottix Odin are a powerful system, and at the same time incredibly simple, reliable, and hassle free to use. The convenience and solid performance over the cheaper (and even higher priced) options has gained the Odin quite a following as an ideal mid priced solution. The Odin are powerful because they allow mixing ETTL and Remote Manual Power setting in any of 3 groups, all shown together clearly on the LCD screen, and easily accessed for quick adjustments. The Odin control everything through their own clear and simple interface, so they work exactly the same on any compatible camera whether they have exisiting flash control menus or not. The Odin have HSS to 1/8000th, Second Curtain Sync, combined FEC up to 6 stops, and Remote Manual Power setting in 1/3rd stops. Manual flashes and studio lights can also be triggered with Odin, Strato II, or Atlas receivers. UPDATE - Now compatible with the Mitros + flash unit with Odin transceiver built-in.

Compatible with – Mitros +, Phottix Strato II, Strato, and Atlas II manual triggers

Allow Flash on Camera – Mitros + – TX works on a bracket & extra Rx

AmazonUK, EbayB&H PhotoAdoramaPhottix 

MORE DETAIL - Click to Expand

Please also see the Phottix Odin review for full flash and camera compatibility HERE

UPDATE - Now compatible with the Mitros + flash unit with Odin transceiver built-in.

 

Great Features (Canon version shown – Nikon and Sony versions have similar functionality) –

  • Everything is controlled through the one simple Odin transmitter, this is really the standout feature of the Odins.
  • Most importantly they work flawlessly with plenty of range and no misfires or radio interference issues.
  • Manual and ETTL can be used and combined together at the same time, in 3 different groups.
  • Compatible with most Canon EX flash units  420ex, 550ex, 430ex, 430exII, 580ex, 580exII. (& some Nissin flashes)
  • Compatible with all Canon ETTL II camera bodies from the 20D onwards, no special flash control menus required.
  • Up to 6 stops of FEC Flash Exposure Compensation in TTL (that is in combination with the cameras FEC)
  • Backward compatible with the Phottix Strato II and Strato. (Strato/II Transmitter will NOT fire the Odin Receivers though)
  • HSS (high speed sync, up to 1/8000th), Second Curtain Sync, and FEL (Flash exposure lock) works.
  • Remote Control of the Flash Zoom Head, in Manual or Auto (auto follows the lense zoom length).
  • Hypersync, high speed sync with monolights. (Not an official feature but this does works in many cases)
  • Firmware updates via built-in USB ports.
  • 1/3rd stop manual power adjustment, even for Canon 550ex, 430ex & 420ex flashes which usually do not support this.

 

Limitations –

  • No Flash directly On Camera – this is possible though using an on-camera flash bracket and extra receiver.
  • No AF (auto focus) Assist Light. – As above still possible with a bracket and flash or ST-E2 mounted above camera.
  • Light meter use is limited, even in remote manual use.
  • TTL compatibility currently only with Canon, Phottix and some Nissin flash units. Not YongNuo or Sigma etc.

 

Phottix (Canon version) -

Photographers can wirelessly trigger TTL flashes, retaining full TTL functions, as well as remotely control power and flash zoom settings. Shooting with off-camera TTL flash has been made incredibly easy.

Say goodbye to manual mode, proprietary flash-based triggering, or setting values on your camera LCD – reliable wireless radio-based TTL triggering and remote power control is here.

Functions

  • Wireless 2.4GHz. TTL and Manual Flash Triggering
  • Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments  – 18 different levels.)
  • Mix TTL and Manual flash – fire some groups in TTL, others as manual.
  • Remote power control in A:B ratio modes with +/- EV adjustments
  • High speed sync – shutter speeds up to 1/8000 sec.
  • Second curtain sync functions
  • Remote manual mode flash power control
  • Remote flash head zoom adjustments – auto or manual
  • Compatible with Phottix Strato 4-in1 and Phottix Strato II Multi 5-in-1 Wireless Triggers.
  • Upgradeable via built-in USB ports.

What does the Odin offer?
The Phottix Odin TTL Trigger consists of an on-camera transmitter and control unit (TCU) and receiver units for compatible hot shoe flashes.

The Odin offers photographers four wireless channels and three flash control group designations. Flashes can be controlled in traditional Canon TTL ratio modes A:B with EV +/- adjustments of three stops.

What makes the Phottix Odin unique is the ability to designate groups in TTL/Mixed mode. Individual groups, A, B, C, can also be controlled in TTL mode with EV +/- adjustments. Groups can also be set to Manual mode, adjusting power levels remotely, or turned off.

Zooming ahead
Flash head zoom can be set to be dynamically adjusted as photographers adjust their lenses. Flash zoom can also be easily adjusted manually and set statically from 24 to 105 mm. The Phottix Odin system will also trigger compatible non-TTL flashes and studio strobes.

Compatible with the Phottix Strato series
The Phottix Odin TTL Flash Trigger for Canon is compatible with with Phottix Strato 4-in1 and Phottix Strato II Multi 5-in-1 Wireless Triggers. Current Phottix users will have no problem adding the Odin to their current triggering systems. As the world of cameras and flashes is always changing the Photix Odin system can be upgraded when needed using the built-in USB ports.

Specs
The four-channel, 2.4 GHz, transmitter and receiver units work at ranges of more than 100 meters and accept AA batteries. Phottix Odin TTL Flash Trigger sets with a TCU and Receiver will be available, as will as individual receivers.

What’s included:
Phottix Odin TCU Transmitter
Phottix Odin Receiver
4x AA Batteries
3.5mm to PC Sync Cable
3.5mm to 3.5mm cable
6.3mm adapter
USB Cable
Lanyard
Instructions CD
Technical Specifications
Frequency: 2.4 GHz
Distance: 100m+
Channels: 4 channels
Groups: 3 groups – A, B, C
Batteries: 2 x AA batteries (TCU and Receiver), 5V DC on receiver (external power port)
Max sync speed: 1/8000 sec*
Output: Hot shoe, 3.5 mm port (receiver)
Input: USB port (transmitter and receiver)
Attachment: 1/4 tripod lug, cold shoe (Receiver)
Input voltage:2.4-3.2V
Flash port voltage handling: 6V (transmitter)  ≤300V(receiver)
Body dimensions: 94(L) x 66(W) x 35(H) mm, (transmitter), 90(L) x 45(W) x 40(H) mm (receiver)
Weight: 105g (transmitter), 66g  (receiver) – without batteries
Operating temperature: -15—65 C
Storage temperature: -30—85 C
Compatible: Canon EOS Digital Cameras and Flashes. Some third party TTL flashes may function with the Phottix Odin. Due to the vast number of third party alternative Phottix will not test, support or troubleshoot third party flashes.

 

Website – Canon – Nikon – Sony

AmazonUKEbayB&H PhotoAdoramaPhottix 

Red Line

PERMALINK

HIGH END – TTL & REMOTE MANUAL

 Radiopopper PX PERMALINK

Radiopopper PX

Around – $380 a set – Tx & Rx

Canon – Nikon – via the same unit

Radiopopper PX are an optic to radio bridge. They simply convert the optic based wireless flash system already in many Canon and Nikon cameras, to a radio based communication, with no line of sight, sunlight, or short range restrictions. The PX functionality is basically the same as your cameras existing wireless optic system – TTL, Ratios, HSS to 1/8000th, and Remote Manual Power Setting. Manual flashes can be triggered with JrX receivers, or remotely control the power levels of Alien Bees monolights (not Einsteins) with JrX Studio receivers (though the JrX transmitter is actually more convenient for this). Mounting receivers to the flashes can be a bit more awkward than regular hotshoe based triggers, though the PX transmitter has the advantage of solid direct flash on camera mounting rather than some flimsy pass through hotshoes. Since the release of Canon’s own radio flash system the PX price has dropped from $249 to $189 for each unit. US and European versions are required.

Compatible with Radiopopper JrX remote manual triggers

Allow Flash on Camera – YES

Amazon, UK, EbayAdoramaB&H Photo

MORE DETAIL - Click to Expand

Compatibility

PX Transmitter

The PX transmitter can be used with the following master flashes or commanders:

  • Canon Master Flashes:  550EX, 580EX, & 580EXII
  • Canon Commander:  ST-E2
  • Nikon Master Flashes:  SB-700, SB-800, SB-900 & SB910
  • Nikon Commander:  SU-800
  • Nikon Cameras with built-in Commanders:  D80, D90, D200, D300 & D700

PX Receiver

The PX receiver can be used with the following off-camera flashes:

  • Canon: 420EX*, 430EX, 430EXII, 550EX, 580EX, 580EXII & 600EX**
  • Nikon: SB-600, SB-700*, SB-800, SB-900 & SB-910***
  • Quantum: Qflash T5D-R (with Qnexus Attachment)

* The PX receiver bracket will not fit onto the Nikon SB-700 flash, Canon 420EX flash or the Qflash.
** The 600EX can be used only as a slave flash in optical mode (the Canon radio is not compatible with the RadioPopper radio system). Mount the 600EX in the 580EXII slot on the PX Receiver bracket. 
*** Use the SB900 slot on the PX Receiver bracket.

Specs

Both PX Transmitter and PX Receiver have similar specifications as follows.

Dimensions : 2.0” x 2.0” x 0.8” (50mm x 50mm x 20mm)
Weight: 2.0 ounces / 60 grams (Including battery and antenna during normal operation)
Battery: Two “AAA” Sized Standard Batteries / Alkaline, NiCad, or NiMH / 0.9 volt to 1.6 volt
Battery Life: Approx 25 Hours continual active transmit time for Std Alkaline battery.
Radio Frequency: 902-928 Mhz, ISM Band
Radio Range: 300 ft to 1750 ft depending on conditions and environment

 

Website – Radiopopper

AmazonUKEbayAdoramaB&H Photo 

 Canon 600EX-RT & ST-E3-RT PERMALINK

Canon 600EX-RT & ST-E3

600EX-RT – $550  ST-E3-RT – $300

Canon – version only available

In march 2012 Canon became the first camera manufacturer to introduce a radio based wireless flash system with transmiter and receiver built into the new 600EX-RT Speedlites. As well as the new low profile ST-E3-RT  transmitter unit with matching interface. The RT offer up to 5 groups, ETTL, Remote Manual, and HSS to 1/8000th. With 2012 cameras onward you have access to a Nikon style interface which allows mixed ETTL and Manual in any group, while adjusting FEC or manual power in 1/3rd stops for each group. For many wedding and event photographers the big advantage over third party radio options is the solid direct flash on camera mounting, avoiding flimsy pass through hotshoes or additional transmitter units on the camera. No extra transmitters, receivers, cords or batteries to manage. Limitations include a lack of separate receiver option to trigger other manual flashes or studio lights, (let alone remote control them). No AF focus assist light on the ST-E3-RT, and no Second Curtain Sync available off camera, (which many cheaper 3rd party options already provide). The large clear LCD is nice, though the interface its still more fiddly than the instant access to basic adjustments many photographers would really prefer. The convenience of a reliable integrated system though makes the RT one of the most convenient options for many wedding and event photographers.

Allow Flash on Camera – YES

600EX-RT – Amazon, UK, Ebay, B&H Photo, Adorama
ST-E3-RT – Amazon, UK, Ebay, B&H Photo, Adorama

MORE DETAIL - Click to Expand

Canon Website – 600EX-RT – ST-E3-RT .

 PocketWizard TT5 & AC3 PERMALINK

PocketWizard TT5 – TT1 – AC3

Around $510 a set – Tx & Rx & AC3 – TT5 $230 – TT1 $200 – AC3 $80

CanonNikon – versions available

PocketWizard ControlTL are the most comprehensive system available for controlling both speedlites and studio lights, with full Sekonic light meter integration and remote camera triggering. Combined with the new Sekonic L-478DR touchscreen light meter, manual power levels can even be adjusted directly on the meter while taking readings. Canon and Nikon TT1 and TT5 versions are available for ETTL and ITTL, and they can control both Canon and Nikon flashes at the same time, as well as remotely control the manual power levels of Elinchrom RX, PCB Einstein, AlienBees, and White Lightning monolights, (with the appropriate receiver modules). The AC3 Zone controller is one of the fastest interfaces available providing instant access to 3 groups with 1/3rd stop adjustments in TTL or Manual. HSS to 1/8000th and Second Curtain Sync are supported. Hypersync with automatic and manual timing adjustment allows sync speeds up to 1/8000th with studio lights (results vary with lights and cameras). PocketWizard ControlTL have had considerable radio noise interference issues with the popular Canon 580exII flash, though the later 600EX-RT are very lower noise, so those issues are mostly be behind them now. 600EX-RT can be controlled like other Canon flashes on a TT5 receiver, though Integration directly with Canon’s own RT radio system is not possible at this point. PocketWizards require separate US and European versions.

Compatible with all PocketWizard triggers (separate FCC & CE versions)

Allow Flash on Camera – YES

TT1 – Amazon, UK, Ebay, B&H Photo, Adorama
TT5 – Amazon, UK, Ebay, B&H Photo, Adorama
AC3 – Amazon, UK, Ebay, B&H Photo, Adorama

MORE DETAIL - Click to Expand

It should also be noted, although not widely publicised, when using the AC3 Zone Controller there is actually a 4th Zone (or group) D available as a basic manual (fire signal only) Zone, so there are 3 Control Zones plus the 4th fire signal only Zone.

For extensive details on the Control TL system please see the PocketWizard webstite – PocketWizard

 Quantum CoPilot PERMALINK

Quantum Pilot – CoPilot – FreeXwire – QLINK

Around – Pilot $440 – CoPilot $200 – FreeXwire Rx $200 – QLINK – $130

CanonNikon - versions available

Quantum Pilot and CoPilot are mainly designed for Quantums own Qflash system, which have been popular with wedding and event photographers due to the higher power, no overheating, and larger/softer light source of the bare bulb flashes. It is also possible to integrate Canon and Nikon speedlites into the system with additional QLINK adapters, and from what I understand even run  soley Canon/Nikon flashes with a Pilot commander and FreeXwire receivers with QLINK, (though not the most cost effective with PocketWizards nearly half the price there). The Quantum system has a number of options, with commander units built into the Qflash Trio for flash on camera and remote slaves, or the similar Pilot commander without flash head, and more compact CoPilot with quick analogue adjustment dials and built in AF assist light. Up to 3 groups with full HSS, TTL, Ratios, and mixed Remote Manual and TTL groups. Quantum make serious gear the way photographers would like to use them, they were well ahead of Canon with radio transmitter and receivers built in to the flash units, as well as AF assist lights on the commander units (which  PocketWizard AC3 and Canon ST-E3 still lack for example).

Compatible with Quantum Pilot, CoPilot, FreeXwire and most Qflashes

Allow Flash on Camera – YES – if a Qflash Trio is used as a master

CoPilot – Amazon, UK, Ebay, B&H Photo, Adorama
Pilot     – Amazon, UK, Ebay, B&H Photo, Adorama
FreeXwire – Amazon, UK, Ebay, B&H Photo, Adorama
QLINK      – Amazon, UK, Ebay, B&H Photo, Adorama

MORE DETAIL - Click to Expand

Website – Quantum 

Red Line

See also – MANUAL RADIO TRIGGER GUIDE HERE

.

43 Comments
  1. juan 4 years ago

    hi, am from venezuela and i work whit vivitar and one sb600, i wanna know if i can use the high speed whit the vivitar, muchas gracias

    • Author
      Flash Havoc 4 years ago

      Hi Juan,

      The first question would be which model Vivitar do you have, and is it HSS and TTL enabled to start with?

      There is mot much feedback with Vivitar regarding TTL trigger compatibility so it would be better to stick with the better known flash options. If it is TTL and HSS enabled there may be a possibility it will work with some triggers, but that may still take trial and error to discover.

    • Mauricio Schneegans 4 years ago

      Hola no podes usar Auto FP con el SB600 y usando el vivatar 285 amenos que tengas triggers que manden infromasion iTTL y manual para el vivatar

      • Author
        Flash Havoc 4 years ago

        Tranlated Quote “Hello can not use Auto FP with SB600 and 285 using vivatar unless you have triggers that send infromasion iTTL and manual for vivatar”

        Hi Mauricio, most of the TTL triggers will fire manual flashes as well as TTL compatible speedlites.

  2. Jaron 4 years ago

    I’ve been looking for a list like this – great work!

  3. duco 4 years ago

    Any HSS P-TTL flash trigger for Pentax?? :(

    • Author
      Flash Havoc 4 years ago

      Hi there, there is no dedicated Pentax option as yet, but if your Pentax has optic wireless flash built in you can use the Aoketec AK-TTL to convert the optioc signal into a more reliable radio based signal. The AK-TTL will only do what your camera and flash system already provides, just more reliably without line of sight issues etc. http://flashhavoc.com/ttl-radio-trigger-guide/#Aokatec_AKTTL

      • duco 4 years ago

        Thank you for fast answer, but i looking for a “real” P-TTL flash trigger for my cameras:645 and K-5 & flashes…

        Hope- coming soon………

        • duco 4 years ago

          In my country, Pentax is most popular Camera .Many people loking for ANY P-TTL flash trigger…

  4. paul 4 years ago

    wondered if these have been tried using PW iii …….in my case d800 with PW iii firing to a 568ex with PW iii attached with 3.5 – 2.5 mm sync cord……will it work and will I be able to use HSS settings, please help, neither yongnuo or Pocket wizard seem to have tried this.

    • Author
      Flash Havoc 4 years ago

      Hi Paul,

      I haven’t tried that specific combination of gear, but I don’t see any reason why the PW Plus III would not fire a YN-568EX connected via Sync cord as you mentioned (from the D800).

      The Plus III are a manual only trigger though, so they will not do FP HSS at all. Only Hypersync if used with a TT1 or TT5 transmitter unit. Hypersync is more suitable for studio / monolights though, as you have to fire at full power all the time.

      Your best option is to either wait for the HSS enabled YN-622N trigger coming soon, or use a genuine Nikon flash unit like the SB-910 etc with PocketWizard Control TL (TT1/TT5). With the Nikon flash you would be safe with other good options like the Phottix Odin too.

  5. ricardo 4 years ago

    Igoing to kill myself
    there is nothing good for nikon

    • Author
      Flash Havoc 4 years ago

      Hi Ricardo,

      I’m not sure why you say that, the Phottix Odins, PocketWizard TT1/5, Radiopopper PX & JrX, Aokatec AK-TTL, are all good options.

      If you mean something more like the Kings for Canon or YN-622C, keep an eye out as the Nikon YN-622N are coming soon.

      • ricardo 4 years ago

        the Phottix Odins, PocketWizard TT1/5, Radiopopper PX & JrX, Aokatec AK-TTL, are all good options.

        Yes, and also the most expensive

        • Author
          Flash Havoc 4 years ago

          The Aokatec AK-TTL are in the same $100 range as the YongNuo and Pixels etc.

          The YN-622N will be out soon, you’re not going to find any cheaper than those.

          • ricardo 4 years ago

            I hope thad the pixel king II release them soon

  6. ricardo 4 years ago

    The MK-900 is compatible with the >>PIXE king II<< at HSS 1/8000s ?

    • Author
      Flash Havoc 4 years ago

      Sorry no the MK-900 does not support HSS. I haven’t heard any reports of it being used with the current Pixel Kings, so I don’t know how compatible they are otherwise.

  7. Strobe-X 4 years ago

    Thanks for putting this great flash radio trigger round-up! Really helped me a lot! Coming from CLS and using HSS I’m looking for a radio trigger that can work like my Nikon CLS. Ie. Do HSS and adjust flash settings on camera! With regards to TTL i’m not really fond of it right now as I rely setting my flash power manually and doing it remotely on my camera is one i’m looking for for radio triggers. Odins looks impressive right out of the bat! But curious to see what else it out there from Pixel King and Yungnuo 622!

    I know these don’t do TTL, but why no Cactus? Also, i just heard of Scott Robert Lim units.

    • Strobe-X 4 years ago

      oops..i didnt’ see you had a separate review for all manual radio triggers.

  8. d7kographer 4 years ago

    Excellent overview on the radio triggers available for TTL and manual control. I decided to go with the Aokatec AK-TTL several months ago and I am very pleased with them. I shoot with a Nikon D5100 and D7000 and and a set of 2 x Nissin Di866 and 1 x Nissin Di622 flashes. The D7000’s commander mode is great and can control two groups of flashes in TTL and manual control over 100m using the Aokatec AK-TTL radio triggers.

    The D5100 I have to use one of my Nissin Di866’s on camera and use it as a commander to control the other flashes. I could do this without the Aokatec AK-TTL radio triggers but I have the earlier version Di866 flashes and the TTL CLS wireless range is not good. Using the Aokatec AK-TTL radio triggers I get at least a 100m range.

    I am now looking at getting either a Nikon SU-800 or another flash such as the Nissin Di866 Mk2 so that I can control 3 groups instead of 2.

    I was very interested in the Phottix Odin system, however they dont really support 3rd party flashes working with their system so i gave it a miss.

  9. Captaindash 3 years ago

    Is there any trigger system out there that will remote power control (I don’t care if it’s TTL or not, I just want to be able to remotely control my power output) Nikon, 3rd party, AND Einstein units? I currently only use Nikon and Einstein and I know pocket wizard can do them both, but those 3rd party speedlights (yongnuo/phottix/nissin) seem like a way better deal than the nikon ones so I wanna pick some up, but not if I can’t control their power output remotely. Even if I have to stick with a single 3rd party manufacturer for speedlights because it, it’d still be more choice than just nikon. I just want remote power control for speedlights (Phottix Odin etc) AND my Einsteins. Please, please tell me. I’ll be your best friend (or I’ll promise to never talk to you again, whichever you prefer).

    Then again, if every manufacturer of everything keeps coming out with Canon stuff a year ahead of the Nikon, I just might have to switch.

    • Author
      Flash Havoc 3 years ago

      Hi Captaindash,

      Nissin Di866 II generally work ok with Pocketwizard TT5 as far as I’m aware.

      But really the TT5 itself is the part that’s adding the cost to each flash, if that’s what you’re concerned about.
      .

      No there is no other option to control Einsteins and TTL flashes with the same transmitter.

      Though you could use the Cyber Commander (or PW) to adjust the Einsteins, and then look at something like the Godox V850 remote manual speedlights. They are only from around $120 each even with the receiver.

      The FT-16 transmitter controls the remote manual power level of the V850, but like the Cyber Commander, and even the PW AC3 now, they can all be used in hand as a remote control, and just one of them would be used to actually connect to the camera and fire all the flashes.

  10. Chris Norris 3 years ago

    Are their any radio triggers for the Panasonic G6 offering off camera TTL?

    • Author
      Flash Havoc 3 years ago

      Hi Chris,

      Sorry no, not that I’m aware of at this stage.

      The Aokatec AK-TTL optic to radio conversion triggers are the only ones that have a work around for Olympus and Pentax, but they still don’t work with Panasonic as far as I’m aware.

  11. Gianni 3 years ago

    hi there,
    thank you for this useful guide!
    My name is Gianni,and i’m writing from Italy.
    i have a metz 52 af-1 and 50 af-1 that i use in remote (using I-TTL functions) with a nikon D800 and D7000
    recently i’m having some range issue (especially with the 52 af1) and i’m wondering if there is a solution to switch to radio mode (without loosing ttl functions) without buying new speedlights.
    thankyou in advance,
    Gianni

    • Author
      Flash Havoc 3 years ago

      Hi Gianni,

      Unfortunately I do not have that much feedback for compatibility for third party flashes with Nikon TTL triggers.

      Though the most likely to be compatible would be the YongNuo YN-622N.

      Another fairly safe option would be the Aokatec AK-TTL, though they are a little less convenient to mount.

      • Gianni 3 years ago

        thank you very much for your fast reply!
        i appreciate it very much!
        i will check these two options.
        ciao!

  12. Gianni 3 years ago

    Hi,
    i’m gianni again.
    i would let you know, that i have tested the
    Yongnuo YN-622N-TX i-TTL Flash Controller + YN622N Trigger
    with Metz 50 AF-1 and Metz 52 AF-1
    and…. 100% compatible!!
    hope this news can be useful for you!
    regards,
    Gianni

    • Author
      Flash Havoc 3 years ago

      Hi Gianni,

      Ok great to hear the YN-622N worked out for you.

      And again thanks for the compatibility feedback on the Metz flashes, that’s very helpful thanks!

  13. Robert 3 years ago

    I have been getting conflicting information about the Pixel King Pro working with Yn 568EX Nikon. So does the YN 568EX work will Pixel King Pro Nikon?

    • Author
      Flash Havoc 3 years ago

      Hi Robert,

      Pixel are listing the Nikon version YN-568EX and YN-565EX as not compatible with the King Pro.

      The Canon version King Pro and YN-568EX work together, though there can be some quirks and inconsistencies. Pixel list those as compatible, though note – “abnormal phenomenon may occur when using YongNuo flashes”.

      So its possible the Nikon versions may work together to some degree, though very likely not as consistently as you would hope. So I wouldn’t be surprised if there are conflicting reports of compatibility. In general they are likely a combination best to try and avoid. Thanks.

  14. Dave 3 years ago

    I’m wondering if the Phottix Strato TTL offers [TTL] or standard, center-weighted TTL with cameras like the Nikon D800 and D300s and SB-800. I’m wonder if it works with Nikon’s FV Lock (flash value lock).

    I’d like to get rid of the Nikon SC-17 and 28 TTL cords when using a wedding/press flip bracket.

    Dave

    • Author
      Flash Havoc 3 years ago

      Hi Dave,

      I’m not that familiar with the Nikon TTL system myself, though I would be surprised if the Strato TTL do not provide FV lock and the TTL options as you would have with the flash on camera or on the TTL cord.

      I haven’t really come across anyone that is using radio triggers like this instead of a cord though. You would have the weight of a couple of extra sets of batteries to start with. I think I would personally prefer to make a custom TTL cord that’s made neatly to size.

      You would be best to contact Phottix though if you want to get a confirmation on the Strato TTL functions. Thanks.

  15. Dave 3 years ago

    I’ve set an email to Phottix.

    Thanks!

  16. Ian 3 years ago

    Your Pixel King links on this page are incorrect, resulting in 404 errors!

    For example: http://www.pixelhk.com/pixelhk.com/Proshow.aspx?id=158
    Should be: http://www.pixelhk.com/Proshow.aspx?id=158

    • Author
      Flash Havoc 3 years ago

      Great thanks for letting me know Ian. I have updated those now.

      A lot of work to do still with the guide. Thanks again.

  17. Ram 12 months ago

    I highly appreciate all the information provided. Keep up the great work.
    I have YN-622N, YN-622TX and Lumopro lp180. I can trigger the flash but unable to change the power/output of flash. Can you please help and let me know how to do this? I even tried pc sync to 3.5mm cable.
    Thanks a lot.

    • Author
      Flash Havoc 12 months ago

      Hi Ram,

      Thanks for that, unfortunately that is not going to work though in any case. The LP180 are simple manual flashes with no remote control possible with any radio triggers.

      The later LP180R have a Phottix Odin radio receiver built inside, for remote manual use only. They will not work with the YongNuo YN-622 transmitters though.

      To have control with the YN622 triggers you need to use full TTL flashes from Nikon or YongNuo.

  18. Ramin 10 months ago

    Hi,
    I have recently purchased Sekonic L-478DR and I need to now the channel Frequency ? I need to pair Sekonic L-478DR with my Huhnel Tuff TTL for Nikon , Due to Sanctions on Iran, I am unable to purchase Pocket Wizard Plus III and its accessories , is there a solution or any other solution rather that Hahnel and pocket wizard by any chance. Any pro comments will be highly appreciated .

    • Author
      Flash Havoc 10 months ago

      Hi Ramin,

      You can’t link the Hahnel triggers with the Sekonic meter via radio unfortunately. You could possibly attach the meter to a Tuff transmitter via PC sync cord, though I don’t have the Hahnel triggers to confirm that will work. Otherwise you can just set the meter to wireless mode, and it will take a reading when it see the flash go off. That may be an issue if you’re using TTL though, due to the TTL pre-flashes.

      If you want a linked system other than PocketWizard, then the Phottix Strato II, and Elinchrom Skyport both have Sekonic meters available now. They are manual triggers only though (as are PocketWizard Plus III).

  19. Daniel 10 months ago

    Hey,

    Do you know if the mini TT1 will hyper sync my Nikon sb – 24’s connected to my plus ii’s?

    I know remote Ttl will not be an option, I just want to know that I can shoot faster than 1/200th of a second on my d600 with a mini tt1 and Nikon sb 24’s connected to my plus ii’s.

    Thanks.

    • Author
      Flash Havoc 10 months ago

      Hi Daniel,

      Yes they should. Though you need to keep the SB-24 on full power to have a long enough flash duration. So its generally not the most practical thing to use with speedlites, though it should work.

Leave a reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Anti-Spam Quiz:

©2016 FlashHavoc.com - PRIVACY POLICY

Log in with your credentials

Forgot your details?