PIXEL – KING PRO for SONY – Released

PIXEL KING PRO SONY

 

Pixel HK have release a Sony Alpha compatible version of their King Pro, TTL and HSS enabled radio transceivers, previously available for Canon and Nikon DSLR systems.

Pixel were originally one of the first manufactures to develop TTL radio triggers for the Sony system in their original King Transceivers. Though they were eventually discontinued as Sony transitioned to the new Multi Interface Hotshoe design.

Now with the rise in popularity of Sony Alpha cameras Pixel have returned to development of the Sony system again. With the King Pro Transceivers for Sony now providing a Multi Interface foot below, and full Multi Interface TTL pass through hotshoe on top.

 

 

PIXEL KING PRO SONY

 

The King Pro for Sony provide TTL, HSS (High Speed Sync) to 1/8000s, SCS (Second Curtain Sync), and LDS (Long Duration Sync) (no pre-sync timing adjustment though).

3 Groups can be individually set to either TTL, Manual, or Off. And TTL and Remote Manual Groups can be conveniently mixed together as needed.

The King Pro also feature exceptional range for a TTL radio trigger system, stated as 300m+ (though in reality around double the 60m workable range most 2.4GHz triggers generally provide in TTL mode).

 

PIXEL KING PRO SONY

 

Pixel are also endeavouring to make the transition to cross compatibility between camera systems.

With the King Pro Transmitter for Sony now providing Remote Manual Power Control, HSS, and Remote Zoom Control, with Canon and Nikon version King Pro, and King X, receiver units.

 

PIXEL KING PRO SONY

 

PIXEL KING PRO SONY FEATURES

 

  • Pixel 2.4GHz X Radio System
  • Range – 300m +
  • Flash Modes – TTL / M / OFF
  • HSS to 1/8000th
  • Second Curtain Sync
  • FEC / FEB – 1/3rd Increments (±5 Stops)
  • Manual Flash – 1/128 – 1/1 Output (1/3rd Increments)
  • Remote Flash Zoom (Auto / Manual) (24-105mm)
  • Groups – A / B / C   (3 Groups)
  • 15 Channels (+ 1 Auto Channel)
  • Dot Matrix LCD Display with 2 Color Back Light (Master & Slave Modes)
  • Modeling flash
  • Auto Memory Function
  • AF Assist light
  • Shutter Release Function
  • Long Duration Sync with Studio Lights etc
  • Sony MI (Multi Interface) Foot
  • Sony MI (Multi Interface) TTL Pass Through Hotshoe
  • Micro USB Port for Firmware Upgrades
  • PC Sync Port

 

PIXEL KING PRO SONY

 

Being transceiver the King Pro can be set to either Transmitter or Receiver mode, which are easily recognizable with their different color LCD backlights.

Though slightly more economical (no LCD display) King X Receiver units are also available to use as dedicated receiver units only.

 

PIXEL KING PRO SONY

 

King Pro Transceivers also provide a mini USB port for firmware updates, and a traditional PC Sync Port.

 

PIXEL KING PRO SONY

 

PIXEL KING PRO SONY SPECS

 

PIXEL KING PRO SONY

 

PRICE AND AVAILABILITY

 

The Pixel King Pro transceivers for Sony are currently going through final beta testing, and should be available shortly from around $130 a pair –

EbayAmazon, UK

 

 

Pixel – Website

King Pro – Canon
King Pro – Nikon

 

.

7 Comments
  1. lama 2 months ago

    I would like to know if new Pixel King Pro can trigger old Pixel King TTL for Sony (Minolta hot shoe). I’ve asked Pixel King support and haven’t got answer. AFAIK it works like that for Nikon and Canon versions.

    They claim it can trigger Pro for Canon and Nikon.

    With their new website they even discontinued support for downloading firmwares for Pixel King TTL…

    They don’t list A99 and A77 mkI as compatible cameras too.

    • michael 2 months ago

      Yes I have a similar question. I recently updated my sony camera firmware and now I cannot HSS on the pixel kings which is the only reason why I use them. This means all my pixel kings are useless. I contacted pixel and they have dropped support and told me to buy new ones. I only brought them new less than 6 months ago. Very frustrating.

    • LB 2 months ago

      Hello. I have been able to trigger the old Pixel King TTL w/ Minolta hot shoe Receiver with the new Pixel King Pro for Sony Transmitter device. So far I have only tried manual mode, but all worked as intended.

      • Gert-Jan 2 months ago

        Dear LB,
        I have the same question as above: Is the new King Pro able to trigger the old ‘minolta hot shoe’ reciever. Can you confirm by now that it works also in TTL mode and HSS?

        • LB 2 months ago

          Hello Gert-Jan: The new Pixel King Pro for Sony works very nicely with the older Pixel King for Sony ( Minolta Hotshoe). For sure, I am able to trigger my old Pixel King for Sony Minolta Hotshoe M/TTL, HSS with the new Pixel King Pro transceiver—No problem as I stated in my last post on this forum.

          Couple of notes:
          I did have QC problems with these new Pixel King Pros for Sony. The first set of PK Pros for Sony I received would not work in TTL mode. I returned the first set to the retailer as defective. The second set TTL worked M/TTL/HSS, but one of those units would not displkay any data after a few seconds so I had to return one of those unitis as defective. Thankfully the retailer agreed to provide a replacement. Now I have TWO 100% functional Pixel King Pro for Sony transceivers that work 100% M/TTL/HSS also with my old Pixel King for Sony with Minolta hotshoe receivers.

          Important Note: Do Not attemnpt to update your Pixel King Pros for PK for Sony to ver 2.0 ! NO NO NO. I have attempted to update to Sony King Pro 2.o several times on both Windows 7 and 10 as well as Mac 10.12. The ver 2.0 update will BRICK your Sony Pixel King Pro. Worse, I contacted PixelHK on this issue but they sent me a very friendly email response with no solution. AKA whoever answers support emails in English at Pixel King in Hong Kong is very polite, but also clueless as to how to solve any issues.

          Pixel King Pro wil ship with two transceivers. You can select which is slave and which is master. Again. do not attempt to update to ver 2.0. Leave as is with firmware from Nov 2009 and you wil be fine using these units as is and with your old Minolta hotshoe Pixel Kings.

          Hope that helps! Oh and if anyone out there has had a successuful experience updating the Pixel King Pro units to King Pro 2.0 please do tell.

    • Pierredes 1 month ago

      Was tested with A99 here : https://www.youtube.com/watch?v=JB_cqqZjnaQ and seems to work very well, even at very long disances.

  2. Gert-Jan 2 months ago

    Thank you for your elaborate reply. It is very helpful.

Leave a reply to Pierredes Click here to cancel the reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Anti-Spam Quiz:

©2016 FlashHavoc.com - PRIVACY POLICY

Log in with your credentials

Forgot your details?