YONGNUO YN600EX-RT II – Speedlite Now Available

YongNuo YN600EX-RT II


YongNuo have released the YN600EX-RT II Speedlite, once again providing both radio Master and Slave modes directly compatible with the Canon RT radio system.

With the main upgrade from the popular original YN600EX-RT being the addition of a Canon Optic Wireless Master mode.

Canon and Nikon Optic Wireless Slave modes are also included, as the original YN600EX-RT also provide.


YongNuo YN600EX-RT II



  • Guide Number (GN) 60 Metres at ISO 100 and 105mm
  • HSS to 1/8000th
  • Flash Mode – ETTL II /M / Multi
  • 1st / 2nd Curtain Sync (No SCS as RT Master)
  • FEC – 1/3rd Increments
  • Manual Flash – 1/128 – 1/1 Output Control (1/3rd increments)
  • 20-200mm Auto and Manual Flash Zoom
  • 2.4GHz RT Radio Master and Slave Modes
  • Canon Optic Wireless Master Mode
  • Canon & Nikon Optic Wireless Slave Modes
  • Flash Groups – Radio A/B/C/D/E, Optic A/B/C
  • Channels – Radio 1 – 15, Optic 1 – 4
  • Recycle Time – 0.1 – 3 seconds
  • Flash Duration – 1/200 – 1/20000s
  • Custom Functions
  • Sound Prompt
  • Heat Protection
  • LCD Back Light
  • AF Assist Light
  • Head Tilt 90 / -7 Degrees, Swivel 180 Degrees Left & Right
  • Tilt Swivel Lock Button
  • Large Dot Matrix LCD Screen
  • Bounce Card & Wide Angle Diffuser
  • Fast Clamping Foot
  • External HV Battery Port
  • USB Port
  • PC Sync Port
  • Weight – 430g
  • Dimensions – 62 x 78 x 205 mm
  • Power – 4 x AA Batteries


YongNuo YN600EX-RT II


The YN600EX-RT II are directly compatible with the 2.4GHz RT radio system built into Canon’s own RT Speedlites like the 600EX-RT II and 430EX III-RT, and ST-E3-RT transmitter units.

As well as YongNuo’s own increasing range of RT products including the YN968EX-RT Speedlite, YN-E3-RT transmitter, and YNE3-RX receiver units.





The Yongnuo YN600EX-RT II are available now from around $100 –

Ebay, YongNuo EbayAmazon, UKAdorama, B&H Photo


YongNuo – Website


  1. Noi 5 years ago

    What is the difference to the YN600EX-RT I?

  2. Michael Quack 5 years ago

    The difference is the added optical master mode, and compatibility to both
    Canon and Nikon as wireless radio slave.

    Very likely it will also have added compatibility to Canon Cameras introduced
    Jan 2015 and after. The YN600EX-RT was incompatible to those flashes as
    radio master, and AF help light did not work on some camera models, namely 80D.

    Some users reported to have received mail from Yongnuo stating that
    the need to send in ther units for factory modification, which indicates
    a hardware incompatibility.

    Yongnuo claims that YN600EX-RT units built August 2016 and after are now
    fully compatible. Can’t second that, as mine are dated September 2016 and
    they are incompatible.

    They still do work as radio remotes, but they can’t fire each other as master
    when mounted in the hot shoe, and the YN-E3-RT can’t fire them as well.

    Funny enough, the Canon ST-E3-RT fires both Canon 430/600 RT speedlites
    *and* Yongnuo 600-RT flashes absolutely fine.

    I never use flashes in the hot shoe, so I might take the risk of getting one
    of the YN600-II – it should work as just another radio remote, and one can’t
    have too many of them anyway.

  3. Andy 5 years ago

    I hope YN600EX-RT II fixes the following , IMO, the issues:

    1. locking hot shoe wiggles a lot on camera.
    2. YN-ST-E3 cannot trigger YN600EX-RT when using Non-Canon camera (only works with original Canon 600EX-RT)

    • Michael Quack 5 years ago

      It was worse than that – the YN-E3-RT (at least the unit I own and the
      two others I could lay my hands upon) does not fire even the Canon 600EX-RT
      or the Canon 430EXIII-RT – and not even their own YN600EX-RT on Canon
      Cameras introduced after Jan 2015. This includes EOS 750D/760D, 80D,
      5D MkIV, M3, M5, 1D-X MkII, 1300D . On all these cameras, the original
      ST-E3-RT fires the same flashes fine.

      For Canon E-TTL2, the brain sits inside the camera and not the flash.
      Trigger transmitter and flash can modify control settings, but the main
      controller is inside the camera. This is the reason why the YN-E3-RT or
      the ST-E3-RT will never work with non Canon RT cameras.

      However, since the YN600EX-II now supports Nikon flavor radio remotes
      as well, there is a chance that a Nikon flavor trigger or a potential neutral
      trigger could work with cameras other than Canon/Nikon.

  4. Alexander 5 years ago

    According to tech support YongNuo:
    YN-E3-RT after August of 2016 support a new model Canon cameras

    Dear User,
    Thanks for your email.

    Since 80D is a new release camera, YN flash and trigger produce previously is not fully compatible with 80D(AF beams and camera external flash control menu not working). YN flash and trigger produce after August can fully compatible with 80D. For the flash and trigger not fully compatible with 80D, you can send it to our factory for revise. We are sorry that firmware update can not solve this problem, the hardware needs to be revised.

    In that case, if it is indeed needed, you can send it to us for revising, but you need to undertake high postage. (Please note that you should undertake the shipping cost back and forth, and the postage sending the item back to you is about $25USD or more)

    So we advice you to contact the seller for return or refund according to the purchase agreement. Or you can ask the seller for help of sending.

    Thank you very much for your great support for YONGNUO products!
    Best regards,

    • Andy 5 years ago

      I’d rather buy a new flash. For $250, i can get 2 flashes. Since I stuck with YN600EX-RT (only use it as slave flash during the wedding reception), I have to live with it until it dies.
      If I have to do it again, I’d buy Godox (much better quality and Adorama carries them with re-brand as Flashpoint).

    • Galen 5 years ago

      This is great news. Thanks for forwarding this message. I’m using the older YN 600 flashes with the older commander – it works with the 5D4 but only after ignoring error messages. I shoot in Group mode.

  5. jim 5 years ago

    Last night I brought 2 flashes to a club, the trusty canon 580ex2 and my back up, the disaster that is the yn 600 ex. I was shooting people etc and someone waved their arm accidently and bashed into my 580 ex2, ripping the bottom half below the AF lights. , wires hanfing everywhere etc. I panicked but thought ok, i have my back up.

    Stuck on the YN600 and away I went, for 5 minutes! After that the battery indicator started flashing batteries empty, so ok, i was shooting for 2 hours, even though they were fully charged, i stuck in a fresh pair. After 5-10 minutes, she died. I had to switch it on and back on again and I could only do that a few times before she REALLTY died. Jesus could raise Lazarus, but asking him to resurrect a YN600 might be asking too much.

    So, i had to find a way of fixing my broken 580ex2. Luckily I had a mini screwdriver set and began to try and reassemble the bottom half back to the top. The washers were missing so I had the 4 scrrews. I re attatched the white panel back into the slot, managed to temporarily get the 4 screws back in and voila, she worked, but on and off, but it was something to get me through the night.

    I am resolutely pissed off at Yongnup right now. DONT BUY THIS FLAS ubless it has a seriously powerful AF light for low light situations, club etc, and 2, it doesn’t die aftr 10 minutes.

    • Andy 5 years ago

      I have 4 YN600EX-RT, but I have never experienced something like you have. Being said, I only use YN600EX-RT as slave flashes and my backup is always Canon flashes.
      If you don’t like Yongnuo, take a look at Godox lines. I think Godox is getting good

  6. Michael Quack 5 years ago

    To be fair, no Yongnuo flash ever failed on me, and I have more than a dozen.
    Yes, my YN-E3-RT does not work with cameras introduced 2015 and after, and
    the YN600EX-RT can’t master on top of one of those cameras.

    In my world, flashes don’t belong into hot shoes anyway, and the YN600EX-RT
    works fine as a slave The remaining damage is the YN-E3-RT, but I use that on
    a 1D-X ( introduced pre 2015), and fresh cameras are used with the original

  7. jim 5 years ago

    Just about to DUMP the original yn600 I had. It was absolutely crap and let me down big time at the weekend. 4 charged batteries and it showed zero power and kept shuitting down or was overheating. NEVER AGAIN.

  8. Frank 5 years ago

    I own a 5D4, YN-E3-RT, 2x YN600ex-rt and 1x Canon 600ex-rt. I bought a second YN-E3-RT, manufactured December 2016, but the same with my “old” YN-E3-RT. AF beams and camera external flash control menu not working. Eveything is ok in full manual mode, flash fires as it should be

  9. Kirill 5 years ago

    I own several YN600EX-RT and they have turned out not be be compatible with my new Canon 5D Mark IV.
    Ihave written to Yongnuo and have got the same answer, that flashes bought before Aug. 2016 are not compatible and have to be sent “for revise”, but I’d rather have to contact the dealer, which was Ebay dealer in my case. I have written to two dealers, where I have bought may recent flashes separately. Only one answered. After much back and forth the dealer has agreed to receive my old flash and send it to Yongnuo “for revise”, charging me 52 Euros (a new YN600ex-rt can currently be bought below 90€). I had no choice, have sent it and got the new one, obviously produced after August 2016. UNfortunately IT DOES NOT function properly with 5D Mark IV either (TTL in group mode, to be particular), so I am no step further.

    The YN600EX-RT has a very weird issue to reset the settings while shooting, changing all Groups from TTL to manual. I have written to Youngnuo and it have had a weird answer, like it is “normal” and Original Canon would do the same (which I doubt).

    Anyway, if I want to stik to Yongnuo, I can just hope that at least the compatibility issues have been solved with YN600EX-RT II.

    • Michael Quack 5 years ago

      Kirill, have you tried the original ST-E3-RT in combination with the YN600 as remote radio flash?
      I have obtained good results that way.

      The YN-E3-RT works okay on cameras pre 2015, but not on cameras introduced after that.

      • Kirill 5 years ago

        Thanks, Michael! Good to know, but the solution is not for me: I sometimes do need a flash on the camera for bounced light, but if Yongnuo functions well as slave with the original Canon equipment, perhaps I’ll have to buy at least one original canon 600RT as a master.

  10. pizzetta72 5 years ago

    What I noticed respect the YN600EX first release is that the version II has GN60 at 105mm instead 200mm, so it should be less powerful.
    Also I expected that version II had the led lights mounted below the head as done for YN968EX. Do you think that is better to have these led lights when you use the bounced flash or not?

  11. Frank 5 years ago

    As i told some postings above i own a YN-E3-RT, mfd date December 2016, not working correctly with the 5D4.
    Here is some clearance :
    We have take your video double confirm with Yongnuo. They say this is the system problem and need to back to the factory upgrade. We feel sorry for this situation. We also confuse that why Yongnuo still send us the items not upgrade yet. For now we are not sure that how many items in the stock still not upgrade.

  12. Galen 5 years ago

    Here’s a break down of compatibility that I’ve tested with my units and the 5D4
    (I use a mix of Canon 600ex-rt, YN 600, YN 600 II).

    – commander set to ETTL: both Canon & YN I flashes fire normally, but YN II failed to fire
    – commander set to M: both Canon & YN I flashes fire normally, but YN II failed to fire
    – commander set to GR: all flash types worked when individually set to M or ETTL

    USING THE Yongnuo Commander unit YN-E3-RT (purchased several years ago):
    – commander set to ETTL: both Canon & YN I flashes fire normally, but YN II failed to fire
    – commander set to M: both Canon & YN I flashes fire normally, but YN II failed to fire
    – commander set to GR: all flash types worked when individually set to M or ETTL
    (but, there was an error message indicating that attached flashes were not compatible when changing the settings. simply ignored, the setting changes did take effect but the error message slows down the effeciency of these units for field use)

    Using a newer Yongnuo Commander unit (production date 12/16) I had the same results as the older YN unit.

    I will be retesting my findings with other camera bodies. If I can’t get the system to function reliably I’ll be selling the 15 flashes & 5 commander units I currently own!

    I have yet to test the YN 600 II flash unit as the commander. This set-up is not how I use these flashes in the field.

    • simon 5 years ago

      what ‘re the software version? I can’t reproduce the same issue you met on YN600EX RT II.

  13. Kirill 5 years ago

    I have just received a brand new YN600EX-RT II and it starts with a major disappointment: on 5D Mark IV there is still a major compatibility issue – the flash fires in full power, when set to TTL in a group mode. It would also fire all group slaves, set to TTL with full power. Interestingly, the problem is only in radio wireless mode. With the new optical wireless mode TTL seems to work correctly, but who wants to use it?! Compared to redio it is very unreliable.

    So now I have 5 Youngnuo flashes, which are not fully compatible with my new camera! The only good news is that they have cost me not much more than a single original Canon flash, but I guess I am at the point to be done with Youngnuo.

    HAS ANYBODY ANY SUGGESTION of other generic flashes (similar to Canons 600RT, but cheaper), which would fully support Canon’s 5D Mark IV??

    • Simon 4 years ago

      YONGNUO release firmware for Yn600EX-RT and Yn600EX-RT II to improve the compatibility with 5D Mark IV.
      please update to fix the problem you found.

      • Curtis 4 years ago

        I have firmware 1.26 on YN600EX-RT II and 1.24 on YN-E3-RT, using the commander or a flash as base: rear curtain flash is not an option, only allows first curtain and HSS. Rear curtain is only available when 600EX-RT II is directly connected to the camera.

        • Michael C 4 years ago

          I’ve no direct experience with the YN600EX-RT (original or II). But with the YN658EX controlled by a YN622C-TX I’ve noticed that the camera menu does not give me the option for 2nd curtain sync (it’s greyed out). If I change the sync setting to 2nd curtain using the YN622C-TX. though, the flash correctly fires at second curtain and the in camera flash control menu shows that 2nd curtain is selected. Have you tried changing the sync setting via the flash’s own control menu?

  14. Fritz Nordengren 5 years ago

    Kirill and Galen, thanks for these updates. This is the forum I find most helpful thanks to users like you. A 5D mk IV is in my late year future, nice to know what to expect.

    • Hans van de Riet 4 years ago

      I recently bought or rather exchanged my Canon 70D with an 80D. Canon actually is busy making all non Canon flashes redundant as much as they can, as well as for their camera batteries which are totally priced out of the market. My flashes still work as they are pretty new, but I am getting those annoying messages that this is not a Canon product, as if I didn’t know that!! If Canon thinks that they endear their customers with this policy, they are wrong. Its not YongNuo it’s Canon that is trying to throw a spanner into the works. I admire YongNuo for their willingness to rebuild these flashes that are not compatible anymore. Would you get that sort of service from Canon?? I do get service from Canon at a hefty price only. They don’t even have the decency to answer e-mails.

  15. dslrpundit 5 years ago

    I have heard about a lot of compatibility issues of this flash with latest canon mark IV dslr, is that true? One of my friend recently bought mark IV and was disappointed with flash not working properly with latest canon firmware on Mark IV. Anyone wants to put some more light into this matter? I am asking because I am thinking to buy this flash too.


    • Author
      Flash Havoc 5 years ago

      Hi dslrpundit,

      Please see the comments above from Kirill, Galen, Frank, etc. (Its been the main point of discussion here).

    • simon 4 years ago

      Hi, YONGNUO has release a new firmware (V1.16) to improve compatbility with 5D MARK IV.
      Here’s the link to download the latest firmware http://yongnuo.com.cn/app/yn600ii_offical_fm_V1.16.zip

      • Author
        Flash Havoc 4 years ago

        Thanks for that Simon.

  16. Frank 5 years ago

    Yn600 from 2015 and YN600 II are fine with my 5D4, although YN600 no Af light and menue bug, but no problems with ETTL. But it’s not the latest firmware on my 5D4.

  17. Iosif Kapa 5 years ago

    I received two of these yesterday, to switch from Canon’s ratio system (which I used via 622s) to the RT.

    GREAT flashes, great system. I don’t know how well-behaved the version 1 was, but these two linked effortlessly, fired consistently with no exposure errors, I had no disconnects and no misfires.

    Unlike with the 622s which I was getting fed up with, every single shot in Group mode (mixing TTL and manual groups) came out as expected, and every shot in full auto (both flashes – one master, one slave) came out correctly exposed – I’m impressed with the difference in reliability and predictability.

    They seem of good build quality – positive buttons, good locking of the hot-shoe with minimal “play”. I would like a brighter LCD (unless there is a setting I missed) – and, Yongnuo, it’s time to step-up your game to a better AF assist light – it’s the only thing that MATTERS that you’re behind Canon. I didn’t push the flashes, so I can’t comment on recycle times and possible overheating yet, but I will be ordering one more flash and the transmitter.

    • Iosif Kapa 4 years ago

      I received my 3rd unit, and did some more tests. A few more comments:
      – The AF assist light is still useless, causing backfocus when used; not a problem of the first two units.
      – The LCD’s brightness & contrast are actually adjustable. Still, I would like it brighter than the brightest setting.
      – I noticed that, when in Group mode, turning groups on/off only works on the camera menus, not on the master flash. I thought maybe I was doing something wrong, but the latest firmware (1.13 – http://www.hkyongnuo.com/e-detaily.php?ID=389) acknowledges and fixes this exact problem – will try it.

      One more comment: I find it easier to do the initial setup in the camera flash menu, but I think that changing group settings (ETTL/manual, EV, power, on/off) is actually faster to do on the master flash’s interface.

      • Iosif Kapa 4 years ago

        Another update:
        the firmware upgrade worked like a charm. 3 flashes got upgraded to v1.13 in less than 3 minutes total, and the groups now switch on/off from the master unit as they should. Very-very easy procedure, felt very safe, with only a minor annoyance that all settings get reset after the firmware upgrade.

      • Iosif Kapa 4 years ago

        I received my 4th flash 2-3 days ago, and I would like to clarify something, since editing my previous comments doesn’t seem possible =>
        the AF-assist laser on these units works GREAT. Despite that it seems to be the same “grid” type that all the previous versions used, this is the 1st time it seems to works accurately.
        The problem I had with back-focusing (only with the flash attached) was apparently due to the combination on my lens (Tamron 24-70) and camera (5DmkIII), and is now resolved after a visit to Tamron’s service.
        To summarize: the AF-assist feels very solid.

  18. David 4 years ago

    I have Canon 430 and 580-series Speedlites, and have the YN622C-Tx and Rx units to make them wireless. If I wanted to go to the new Yongnuo RT series, would the on-camera Tx control unit work with these flashes? With the reasonable price of these flashes AND the addition of the battery port, I am considering making the change. I have experience with the Yongnuo YN568EX II, and it perform well. Can anyone help me solve this? Thanks!

    • Iosif Kapa 4 years ago

      David, the 622 and RT systems are not compatible – they don’t communicate. Mounting the 600s on the 622s receivers and controlling them from the Tx should work as usual, but the 622-Tx alone cannot control the 600s. There is of course an RT transmitter by Yongnuo, which will allow full control of the remote 600s.

  19. David Spillane 4 years ago

    I have just purchased a YN E3 Rt and a YN 600 EX-RT ii. I have an issue with the speedlite. All initially worked well. The second time I went to use it the shutter button on my 60D wouldn’t fire the YN 600 EX-RT ii. It would fire my Canon 600 EX-RT. When I push the test button on the transmitter both flashes fire. I have tried looking for firmware updates. The link on the Yongnuo site wont work. I could download the updater software but not the firmware update.
    Is there a fix for this or is the unit faulty?

  20. Jeremy 4 years ago

    I have used the YONGNUO YN600EX-RT Wireless Flash Speedlites with my Canon 5D3 and had no issues at all. I switched to a Canon 5D4 and realized that I need to upgrade to the YONGNUO YN600EX-RT II Wireless Flash Speedlites and a new set of YN E3 RTs (new ones date Feb 2017) – so I did. I have upgraded the entire new kit to the newest firmware and have run them through two long wedding days. It really is a mixed bag. The units (flash and transceiver) both use the autofocus beams on the 5D4 correctly, but what I am finding is that after a few moments of use inevitably the camera loses connection to the flash and doesn’t fire. I have made sure that the battery power is fresh and flip the power switches to the camera, transceiver and flash on and off again with no improvement. The channel is clear as a bell too. I have four of these flashes. Two or more of the four went down at multiple points throughout the night. Later the flashes seemed to “reconnect” and fire for a few moments and would then fail again. Anyone else experience this or have any ideas for a solution?

    • simon 4 years ago

      how about change the wireless channel and ID ?

    • adi 4 years ago

      Hi , how do you know that yours are release in feb 2017?

  21. adi 4 years ago

    how do i know , mine is release after or before agust

    • Author
      Flash Havoc 4 years ago

      Hi adi,

      There is build date sticker, usually on the inside of the battery compartment door, which will have the year and month of manufacture crossed with a pen.

      If its not inside the battery door, they used to put them in-between the swivel head, so you would need to swivel the flash head to see it.

  22. Andy 4 years ago

    Does rear or second curtain sync work with this and the 5diii?

    • Author
      Flash Havoc 4 years ago

      Hi Andy,

      SCS should work with the flash on-camera, though only when NOT in RT radio master mode.

      For off camera RT radio SCS you would need the YN-E3-RT as transmitter on the camera.

  23. jim 4 years ago

    any other reviews/comments about overheating and if its still an issue , would a firmware update solve it in any way?

  24. Michael 4 years ago

    I have 3 YN600-EX, 1 Canon 600-EX and 1 YN-E3-RT, all of them communicate fine and no problems at all in any combinations, except YN600-EX’s just cannot trigger on Rear Curtain mode at exposure more than 2 sec (Hardware limitation they say). Though I haven’t tried with new camera models since I’m using old cameras, 5d3’s and 70D’s.

  25. jim 4 years ago

    any reviews on whether the mark 2’s are overheatin?

    • Daren Fentiman 4 years ago

      I just got my fist 1 a couple of days ago
      Also brand new Duracell rechargeable, as well as eneloops to compare times .
      Then I also bought the 8 aa external batt pack.
      So I wanted to see how many full charge pops I could get out of a set of batt.
      After 6 pops the recycle time slowed way down. 🙁 after 20 pops it overheated.
      so this morning I tried it again with the external pack.
      I didn’t do as many full pops, but the first 2-4 pops the recycle time was like 1 sec +\-
      then after 4 pops it really started to slow down . I also dropped the unit down to 1/8 power, and poped away. It kept right up.
      So at full strength this unit IMHO is a lemon. FYI I was waiting until it reached full power between each pop.

  26. Deepesh 4 years ago

    Hi, I own a canon 5D4 and Yongnou YN-622C 2 Transmitter set. I am thinking of buying a pair of Yongnou YN600EX-RT-ii
    Is it a good Idea? Please help

    • Paul 4 years ago

      No. The 622C is not compatible with the YN600EX, as I’ve found out today!

  27. Iosif Kapa 4 years ago

    I had written my initial, very positive, impressions of the YN600EX RT IIs a few months back. Yet those impressions were based on testing in non-demanding conditions (aka in my home), so I couldn’t comment on aspects such as overheating, reliability during heavy usage, connection quality in long distances.

    Since then, I have worked all summer with 4 of those flashes, in very demanding situations. I am very happy to report that these are the best 3rd party flashes I have owned. No overheating ever, rock-stable connection in distances longer than I need (at least 60 meters) and, most importantly, great exposures in all modes.

    Yongnuo got it right – highly recommended.
    p/s: I sound like a commercial, so here you go. Yongnuo, PLEASE step-up your game with a better AF-assist light!

  28. Paul 4 years ago

    I’ve a YN 622C set, EX430II and YN 600EX-RTII. I hadn’t realised that the 600 wouldn’t be compatible with the 622C set until today. Fortunately the YN equipment can still be exchanged.

    So what are the benefits of using the YN600EX-RTII over the YN685 Speedlite and 622C set?



    • Michael C 4 years ago

      If you don’t already have anything else that uses the RT system there really isn’t one unless you want to use an on camera flash to control other off camera flashes.

      If you want to use a flash on the camera as a master and eliminate the need for separate transceivers the RT system can do that. But if you don’t want an on camera flash there’s not really any advantage to the RT system.

      Right now there seems to be a lot of compatibility issues with the Yongnuo RT system, particularly between the YN-E3-RT and newer Canon camera bodies.

      The YN622 system is more reliable than the YN-RT system with those cameras. If you are using YN685 flashes with a YN622-TX then you don’t have the need for any more extra receivers (and the associated extra battery management issues) than if you were using the YN-E3-RT or Canon ST-E3-RT on the camera’s hot shoe with YN600EX-RT II flash(es) off camera.

  29. dosmer 4 years ago

    I don’t understand. My yn600-rt (1) DOES work as an optical master unit. It does NOT, however, work as an optical slave unit!

  30. Nagato Aree 3 years ago

    Thank you for reviewing this bloody great flash.
    I had bought it, and using it an my Canon 6D, and of course this working perfectly.
    Will YN600 EX-RT II work too if i use it at Nikon D3400?
    As i think it has dual compatibility with Canon and Nikon.

  31. Nagato Aree 3 years ago

    Does YN600 EX-RT II works properly too on shoe at Nikon DSLR?

    • Author
      Flash Havoc 3 years ago

      Hi Nagato,

      Sorry, no the YN600EX-RT II will only work as a basic manual flash when mounted on a Nikon camera hotshoe. There will be no TTL, HSS, or focus assist light etc.

Leave a reply

Your email address will not be published. Required fields are marked *


Anti-Spam Quiz:


Log in with your credentials

Forgot your details?